Specification:

ASTM A213M-09 Standard Speciation for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Super-heater, Heat-Exchanger Tubes.

This standard is issued under the fixed designation A 213/A 213M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last preapproval. A superscript epsilon (′) indicates an editorial change since the last revision or preapproval.

Size:

Hot-rolled:    OD:51-508 mm; WT: 7-60 mm; L: Max 16000 mm

Cold-Drawn: OD: 10-50 mm; WT: 2-10 mm; L: Max 16000 mm

Specifications in accordance with customer requirements.

Packing:

Beveled/black painting/plastic caps/in bundles/steel strips/wooden box/

accordance with customer requirements.

Surface treatment:

Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating

Painting as requested

Mechanical Properties:

Standard Steel Grade TS (Mpa) Ys (Mpa) E (%)
ASTM A213 T2  ≥ 415 ≥ 205 ≥ 30
ASTM A213 T5  ≥ 415 ≥ 205 ≥ 30
ASTM A213 T5b  ≥ 415 ≥ 205 ≥ 30
ASTM A213 T5c  ≥ 415 ≥ 205 ≥ 30
ASTM A213 T9 ≥ 415 ≥ 205 ≥ 30
ASTM A213 T11 ≥415 ≥ 205 ≥ 30
ASTM A213 T12 ≥415 ≥ 205 ≥ 30
ASTM A213 T17 ≥415 ≥ 205 ≥ 30
ASTM A213 T21 ≥415 ≥ 205 ≥ 30
ASTM A213 T22 ≥415 ≥ 205 ≥ 30
ASTM A213 T91 ≥585 ≥ 415 ≥ 20
ASTM A213 18Cr-2Mo ≥ 415 ≥275 ≥ 20

Grade and Chemical composition:

Grade C Mn P S Si Cr Mo V
T2 0.10-0.20 0.30-0.61 ≤0.025 ≤0.025 0.10-0.30 0.50-0.81 0.44-0.65
T5 max:0.15 0.30-0.60 ≤0.025 ≤0.025 0max:0.50 4.00-6.00 0.45-0.65
T5b max:0.15 0.30-0.60 ≤0.025 ≤0.025 1.00-2.00 4.00-6.00 0.45-0.65
T5c max:0.12 0.30-0.60 ≤0.025 ≤0.025 max:0.50 4.00-6.00 0.45-0.65
T9 max:0.15 0.30-0.60 ≤0.025 ≤0.025 0.25-1.00 8.00-10.00 0.90-1.10
T11 0.05-0.15 0.30-0.60 ≤0.025 ≤0.025 0.50-1.00 1.00-1.50 0.44-0.65
T12 0.05-0.15 0.30-0.61 ≤0.025 ≤0.025 max:0.50 0.80-1.25 0.44-0.65
T17 0.15-0.25 0.30-0.61 ≤0.025 ≤0.025 0.15-0.35 0.80-1.25 0.15
T21 0.05-0.15 0.30-0.60 ≤0.025 ≤0.025 max:0.50 2.65-3.35 0.80-1.06
T22 0.05-0.15 0.30-0.60 ≤0.025 ≤0.025 max:0.50 1.90-2.60 0.87-1.13
T91 0.08-0.12 0.30-0.60 ≤0.025 ≤0.025 0.20-0.50 8.00-9.50 0.85-1.05 0.18-0.25
18Cr-2Mo max0.025 max:1.00 ≤0.040 ≤0.030 max:1.00 17.5-19.5 17.5-2.5

See also :

A213 Pipes

ASTM A213 Alloy Steel Boiler Tubes

A355 Pipes

ASTM A335 Seamless Alloy Steel Pipes

A519 Pipes

ASTM A519 Alloy Steel Mechanical Tubing

AISI 4130 Pipes

AISI 4130 Low Alloy Steel Pipes

AISI 4140 Pipes

AISI 4140 Alloy Steel Pipes

DIN 17175 Pipes

DIN 17175 Alloy Steel Pipes

EN 10297-1

EN 10297-1

EN 10216-1, EN 10216-2

EN 10216-1, EN 10216-2

EN 10297-1 Alloy Steel

EN 10297-1 Alloy Steel

EN 10210-1

EN 10210-1

Hastelloy C22

Hastelloy C22

Inconel 600

Inconel 600

Inconel 625

Inconel 625

Inconel 718

Inconel 718

Inconel 800

Inconel 800