ASTM A334
This standard specification for seamless and welded carbon and alloy-steel tubes for low-temperature service.
This specification covers several grades of minimum wall-thickness seamless and welded carbon and alloy-steel tubes intended for use at low temperatures. Some product sizes may not be available under this specification because heavier wall thickness have an adverse effect on low temperature impact properties.
This standard has many steel grades: Gr.1, Gr.3, Gr.6, Gr.7, Gr.8, Gr.9, Gr.11
Reference standard:
ASTM A450/A450 M specification for general requirements for carbon, ferritic alloy, and austenitic alloy steel tubes.
Chemical Composition:
| C %, max | Mn % | P %, max | S %, max | Si % | Ni % | Cr % | Cu % | Co% | Mo % | |
| Gr.1 | 0.30 | 0.4-1.06 | 0.025 | 0.025 | —- | —- | —- | —- | —- | —- |
| Gr.3 | 0.19 | 0.31-0.64 | 0.025 | 0.025 | 0.18-0.37 | 3.18-3.82 | —- | —- | —- | —- |
| Gr.6 | 0.30 | 0.29-1.06 | 0.025 | 0.025 | 0.10 min | —- | —- | —- | —- | —- |
| Gr.7 | 0.19 | 0.90 max | 0.025 | 0.025 | 0.13-0.32 | 2.03-2.57 | —- | —- | —- | —- |
| Gr.8 | 0.13 | 0.90 max | 0.025 | 0.025 | 0.13-0.32 | 8.40-9.60 | —- | —- | —- | —- |
| Gr.9 | 0.20 | 0.40-1.06 | 0.025 | 0.025 | —- | 1.60-2.24 | —- | 0.75-1.25 | —- | —– |
| Gr.11 | 0.10 | 0.60, max | 0.025 | 0.025 | 0.35, max | 35.0-37.0 | 0.50, max | —- | 0.50, max | 0.50, max |
Mechanical Property:
| Grade 1 | Grade 3 | Grade 6 | Grade 7 | Grade 8 | Grade 9 | Grade 11 | |
| TS, min | 380 | 450 | 415 | 450 | 690 | 435 | 450 |
| YS, min | 205 | 240 | 240 | 240 | 520 | 315 | 240 |
| hardness | 163 HB | 190 HB | 190 HB | 190 HB | 190 HB | 190 HB | 190 HB |