ASTM A210
This is standard specification for seamless medium-carbon steel boiler and superheater tubes.
This specification covers minimum wall-thickness seamless medium-carbon steel, boiler and boiler flues, including safe ends, arch and stay tubes and superheater tubes.
This standard has two kinds of steel grade: Grade A-1, Grade C
The tubing size and thickness usually furnished to this specification are ½ in to 5 in (12.7 to 127) mm in outside diameter, and wall thickness 0.035 to 0.500 in (0.9 to 12.7) mm
Reference standard:
– ASTM A450 specification for general requirement for carbon, ferritic alloy, and austenitic alloy steel tubes.
Chemical composition:
| C % | Mn % | P % | S % | Si % | |
| Grade A-1 | 0.27 | Max: 0.93 | Max: 0.035 | Max: 0.035 | Max: 0.10 |
| Grade C | 0.35 | 0.29-1.06 | Max: 0.035 | Max: 0.035 | Max: 0.10 |
Mechanical property:
| Tensile Strength, KSI (MPA) | Yield Strength, KSI (MPA) | Hardness HBR (HB) | |
| Grade A-1 | 60 (415) | 37 (255) | 79 (143) |
| Grade C | 70 (485) | 40 (275) | 89 (179) |
Elongation:
This table gives the computed minimum values:
| Wall Thickness | Wall Thickness | Elongation in 2in, or 50 mm |
| In | mm | min, % |
| 0.312 (5/16) | 8 | 30 |
| 0.281 (9/32) | 7.2 | 28 |
| 0.250 (1/4) | 6.4 | 27 |
| 0.219 (7/32) | 5.6 | 26 |
| 0.188 (3/16) | 4.8 | 22 |
| 0.165 (5/32) | 4 | 21 |
| 0.125 (1/8) | 3.2 | 20 |
| 0.094 (3/32) | 2.4 | 18 |
| 0.062 to 0.035 | 1.6 to 0.9 | 17 |
| 0.035 to 0.022 | 0.9 to 0.6 | 16 |
| 0.022 to 0.015 | 0.6 to 0.4 | 16 |
Heat treatment:
Hot finished tubes need not be heat treated, Cold-finished tubes shall be given a subcritical anneal, a full anneal, or a normalizing heat treatment after the final cold finishing process.